Free and without warranty. The generator makes no promise of food safety. Use the cutter only briefly with dough, wash it by hand and do not put it in the dishwasher. The terms of use apply.
How the generator works
First choose a category and then a shape in it. Besides basic shapes such as a circle, heart and star there are Christmas shapes, animals, dinosaurs, farm, construction vehicles, sea, space, garden, Easter, Halloween, parties and baby, sport, tools and the numbers 0 to 9 and letters A to Z. The size sets the longest side of the cookie. For the rectangle you also set the short side. A 70 mm star is a typical Christmas cutter, for small cookies 40 to 50 mm are enough. The cutting height should be a little more than the thickness of your dough. For shortcrust 12 to 15 mm are enough, for thick gingerbread dough use 20 mm or more.
The wall is 1.6 mm thick at the bottom and becomes thinner in the top 3 mm. That is where it cuts the dough cleanly. At the bottom the cutter has a wide grip rim. It makes the cutter stiff, and you press on it comfortably while cutting. In "Pro" mode you set the wall, the edge and the grip rim yourself. There you also choose how much sharp corners are rounded so the dough comes loose more easily.
Drawing your own shape
With "Your own drawing" a drawing area appears. Draw the outline in one stroke with a mouse, a finger or a pen. The end is joined to the start automatically. The generator smooths the line and scales the shape to the size you set. If the line crosses itself, draw it again. Your drawing is stored in the page address, so you can save or share it with "Copy link".
The generator points out very narrow parts below 3 mm. The dough tends to tear there when you remove it.
Cookie cutter with your logo
With "Start with a logo" you choose an SVG file or an image as PNG or JPG. In one step this gives you the cutter and an embossing stamp with your logo. Most logos sit on a round, square, rectangular or triangular area. The generator detects this basic shape and makes it the outline of the cutter. Under "Basic shape" you can choose another shape if the detection does not fit.
The "Margin around the logo" is the distance from the edge of the cookie to the logo, 6 mm by default. The logo is centred on the stamp and as large as this margin allows. With "Follow the logo" the cutter instead runs along the outer edge of the logo itself. The generator then joins separate parts such as single letters into one outline.
Holes and gaps in the logo stay raised in the dough. The generator traces an image, and the threshold decides what belongs to the logo. The file stays in your browser and is not part of the link.
Downloading several shapes as a set
With "Download set" below the shapes you get all shapes of the chosen category at once, for example all 15 Christmas shapes. Each shape is a separate STL file inside one ZIP file and uses your settings for size, cutting height and stamp. Shapes that do not fit with these settings are left out and listed. You open the ZIP file with any unzip program and load the STL files into your slicer as usual.
Embossing stamp with text
With "Add an embossing stamp" the generator prints a second part in the same file. The stamp is slightly smaller than the cutter and fits inside it. After cutting, you press it into the cutter from above. It embosses a border line and your text into the dough and pushes the cookie out at the same time. The text is printed mirrored so that it reads correctly on the cookie. With "Circle with text" the stamp is already switched on.
Short words and names are the easiest to read in dough. The generator makes the lettering as large as the stamp allows and tells you when the letters become smaller than 4 mm.
Logo on the stamp
Under "Logo on the stamp" you choose an SVG file or an image as PNG or JPG. The generator traces an image: anything darker than the threshold becomes the embossing. An SVG is used directly, white areas are left out. The logo becomes as large as the stamp allows. With a text below it, both share the space and the logo sits at the top.
For company cookies the rectangle works well, for example 72 mm by 44 mm. Fine lines under 1 mm hardly show in the dough, and the generator points them out. The file stays in your browser and is not part of the link. Anyone who opens your link chooses the logo again. Only use logos that you are allowed to use.
How the cutter is printed
The STL file is already oriented for printing: grip rim on the print bed, edge at the top. All walls are vertical, so you do not need supports. The stamp lies next to it with the embossing side up. Both parts are mirrored in the file because you turn the cutter over to use it. That way the cookie looks exactly like the shape you chose.
Print with a 0.4 mm nozzle and a layer height of 0.2 mm. The thin edge then consists of two lines and comes out smooth.
Material and contact with food
PLA and PETG are suitable for cookie cutters. Printed parts have fine grooves between the layers where dough can stick. Use the cutter only briefly with dough and wash it by hand afterwards with warm water and washing-up liquid. In a dishwasher PLA softens and warps. The generator makes no promise of food safety, because that depends on the filament, its colourants and the printer. If you want to be sure, use a filament for which the manufacturer explicitly confirms contact with food.
Frequently asked questions
Which material is suitable?
PLA is preset, is the easiest to print and is stiff enough for a clean edge. PETG is a little tougher and copes with warmer washing-up water. Neither material belongs in the dishwasher.
The dough sticks in the cutter. What can I do?
Dust the cutter with a little flour before each cut and chill the dough before cutting. In "Pro" mode more corner rounding helps, for example 2 mm. With the embossing stamp you simply push the cookie out.
The stamp jams in the cutter. What can I do?
In "Pro" mode increase the clearance in the cutter, for example to 1.5 mm. The clearance is the gap between stamp and edge on each side.
How large can a cookie cutter be?
The shape can be 25 to 200 mm, as long as cutter and stamp fit together on a 220 mm print bed. If the stamp is too large, print the cutter on its own first.
Can I bake cookies with our company logo?
Yes. Click "Start with a logo" and choose your logo as an SVG or image. The generator detects the basic shape of the logo, such as a circle or a rectangle, and turns it into the cutter with an embossing stamp. Alternatively choose any shape, switch on the embossing stamp and load the logo there under "Logo on the stamp". Clear single-colour logos with bold lines show most clearly in the dough. You or your company must hold the rights to the logo.
Can I use the animal and vehicle shapes freely?
Yes. All shapes are drawn specially for this generator and do not show any known characters or brands. You may use the cutters for yourself, for parties and also for a bake sale. The shapes are designed so that no part is narrower than 3 mm, so the dough does not tear when you remove it.
Can I save or share my settings?
Yes. All settings are stored in the page address, including your own drawing. Only a logo is not included, it stays in your browser. Use the "Copy link" button and save the link as a bookmark or send it on. Anyone who opens the link sees exactly your cookie cutter.
The generator runs entirely in your browser. Your shape, drawing, text and logo are not transmitted. When you download a file or copy the link, the page counts anonymously which generator, mode and material were used.












